Product ID:160321-CL-C PRO-PLUG 321 BALL PLUGGING COMPOUND,CLEAR
MSDS Date:08/12/1992
FSC:8030
NIIN:00F031784
Kit Part:Y
MSDS Number: BSPCY

Emergency Phone: 708-234-8100/800-255-3924

Info Phone: 708-234-8100/813-979-0626(COLLECT)

Cage: 60443

Telephone: (708) 234-8100

Cage: 60443

EPOXY RESIN (PROPRIETARY)

DILUENT, UNSPECIFIED (PROPRIETARY)

EPICHLOROHYDRIN-BIPHENYL A EPOXY RESIN

9.4

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION & TRANSIENT
SLIGHT TO MODERATE CORNEAL INJURY. SKIN: IRRITATION, SENSITIZATION.
Explanation of Carcinogenicity:NONE

First Aid:INGESTION: INDUCE VOMTIING IMMEDIATELY BY GIVING 2 GLASSES OF
WATER & STICKING FINGER DOWN THROAT. NEVER GIVE ANYTHING BY MOUTH
IF UNCONSCIOUS. INHALATION: REMOVE TO FRESH AIR. EYES: IRRIGATE
IMMEDIAT ELY W/WATER FOR AT LEAST 15 MINS. SKIN:WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:CO2, ALL PURPOSE DRY CHEMICAL OR ALCOHOL FOAM
Fire Fighting Procedures:WEAR SCBA. WATER MAY BE INEFFECTIVE, BUT MAY
BE USED TO COOL EXPOSED CONTAINERS TO PREVENT PRESSURE BUILDUP,
AUTOIGNITION, & EXPLOSION DUE TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CONTAINERS MAY BUILDUP PRESSURE,
AUTOIGNITE, OR EXPLODE IN EXTREME HEAT.

Spill Release Procedures:USE NIOSH/MHS APPROVED AIR-SUPPLIED BREATHING
APPARATUS. CONTAIN SPILL, COVER LIQUID W/INERT ABSORBENT MATERIAL.
PLACE IN OPEN CONTAINER, WEAR RESPIRATOR/EYE/HAND/BODY PROECTION
APPROPRIATE FOR SIZE O F SPILL & EXPOSURE ENCOUNTERED.

Handling and Storage Precautions:PROLONGED HEATING >160F OR STORAGE
<50F SHOULD BE AVOIDED. PROTECT FROM MOISTURE CONTAMINATION WHICH
MAY CAUSE AN EXOTHERMIC GENERATION OF CO2.
Other Precautions:DON'T TAKE INTERNALLY. KEEP CONTAINER TIGHTLY CLOSED.
EMPTY CONTAINERS MUST NOT BE WASHED & REUSED FOR ANY PURPOSE. AVOID
BREATHING OF VAPORS.

Respiratory Protection:USE POSITIVE PRESSURE AIR-SUPPLIED RESPIRATOR,
NIOSH APPROVED.
Ventilation:MECHANICAL IS PREFERRED
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:EYE WASH FACILITY, SAFETY SHOWER
Work Hygienic Practices:REMOVOE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NOTE TO PHYSICIAN: NO SPECIFIC ANTIDOTE. SUPPORTIVE CARE. ANY TREATMENT
THAT MIGHT BE REQUIRED FOR OVEREXPOSURE SHOULD BE DIRECTED AT THE
CONTROL OF SYMPTOMS & THE CLINICAL CONDITIONS.

Spec Gravity:1.13
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIGHT BLUE MEDIUM VISCOSITY LIQUID W/FAINT
PHENOLIC ODOR.

Stability Indicator/Materials to Avoid:YES
BASES, AMINES, ACIDS, & OXIDIZING MATERIALS
Stability Condition to Avoid:EXTREME HEAT, TEMP > 160 & < 50 F
MOISTURE, FREEZING.
Hazardous Decomposition Products:VARIOUS PHENOLIC COMPOUNDS, CO, OR CO2
Conditions to Avoid Polymerization:MASSES IN EXCESS OF 1 POUND OF
PRODUCT PLUS AN ALIPHATIC AMINE, HEAT, SPARK, HIGH HUMIDITY & OTHER
IGNITION SOURCES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL. AS PRODUCED, THIS PRODUCT ISN'T A WASTE. IF DISCARDED AS
IS, ISN'T CLASSIFIED AS HAZARDOUS WASTE UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.